Case study:

120 Moorgate, London. EC2M

120 Moorgate, London. EC2M

The transformation of tired 1970s architecture into a modern dynamic office development, for occupation by WeWork.

The existing building façades were removed, and slab edges reconfigured to allow the installation of a feature pre-cast stone façade with curtain walling
infills. The office space was extended at roof level and new external terrace areas created.

At ground floor level, an existing bank was relocated to another part of the development and the large sub-terrain levels transformed into a gym and plant space. Other retail shells were also created to the South Place and Moorgate frontages.

Internally the building was fully serviced to Cat B standard for WeWork.

LOCATION
Moorgate, EC2. London
DATE OF WORKS
December 2018
MAIN CONTRACTOR
Blenheim House Construction
ARCHITECT
Darling associates

Works carried out

  • Over 6,000m2 of screeds installed.
  • Polymer bonded screeds to falls to 4 roof levels to over 1000m2 .
  • Preparation of existing slab and installation of debonding membrane and glass fibre reinforcement mesh.
  • Installation of pumped fibre renovation screed to over 5000m2 .
  • Application of new polyurethane resin finishes to over 5000m2 to new office floors.
120 Moorgate involved a substantial amount of new screed and resin finishes to be installed over multiple floors. Diverse were able to assist in the early stages of the project by providing specification advice and product recommendations, before installing samples for client approval. Communication was excellent throughout the project and there is always a proactive and efficient approach to their work. The screed and resin finishes were installed to a high standard, which has led to them securing future projects with BHCL.

Sam Dempster - Site Manager, Blenheim House Construction Ltd.

Accredited Suppliers

Flowcrete logo
Isocrete logo
Addagrip logo
The Resin Mill logo

Approved Installers

DCP logo
Ardex logo
Mapei logo
Cemfloor logo

Do you have a screeding or resin project we can help with?